ColorSpan Legacy Solvent Printer Ink Usage 1
Introduction The printers in the ColorSpan Legacy family of solvent ink printers (DisplayMaker 72S, 72SR, 98SX, 72 & 98SI) each consume ink in all of the following activities: • • • • • Printing jobs sent from a software RIP Printing offline jobs, such as printer calibration patterns, prime bars, etc.
When the printer has been capped—for any length of time—you can reduce the number of Purge-n-Wipes needed to recover the jets by performing a manual wipe first. Without the manual wiping, several Purge-n-Wipes may be needed before jetting is fully restored. With a manual wipe, only one or two Purge-n-Wipes are typically necessary. Page 5-8 of the printer’s User Guide gives instructions on how to perform a manual wipe of the heads.
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
