Daily Cleaning Procedures ColorSpan Legacy UV-Cure Printers 1
Introduction The ColorSpan UVR and UVX printers frequently can recover all working jets at the start of the day simply by printing the Prime Bar pattern several times. It is important, however, to regularly clean the printhead jetting orifices even if visible jetting performance is satisfactory. It is recommended that the printheads be cleaned using appropriate materials and methods at least once per day. This prevents small amounts of partially cured ink from accumulating around the jetting orifices.
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
