Configuring Onyx RIP Products for 600x300 DPI Output 1
Document Overview The ColorSpan Legacy 98sx, 72 and 98SI, 72 and 98UVX, and 72SRU printers have both 600x600 dpi (dots per inch) and 600x300 dpi print modes. The printer itself requires no configuration changes to print in either mode. All settings are made on the Onyx RIP product (RIP Queue, Postershop, or Production House). There are two specific requirements: 1. A media profile created for 600x300 dpi 2.
Selecting 600x300 In Preflight Once you have located a suitable Media Profile with 600x300 support, exit Media Manager and open a job in Preflight. In the “Printer and Media” tab, locate the “Mode” options (second group of options from the top) and set the “Resolution” menu to 600x300. See the example below. Save the changes and return to RIP Queue. You are now ready to move the job to the print area.
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.