Repeating Marks in Specific Solid Colors ColorSpan Legacy Solvent and UV-Cure Printers 1
A small number of customers have reported that attempting to print large areas of solid color in a very specific range of hues produces a repeating pattern in the output. This repeating pattern has an interval of approximately 3.25” (8.25cm). The pattern is typically not observed in most output but may appear when certain colors are selected for printing.
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.
