User's Manual

OLA/R Overview and Concepts
How to On-line Add (OLA) a J3525A PCI Card using SMH
Chapter 4 109
NOTE Do not connect the cables to the card at this point
Step 10. Once you have inserted the new card, return to the console and click
“OK” on the dialog, assuming there is one. At this point, SMH will:
a. return power to the card slot and enable power to the Green LED
b. attach drivers by running ioscan on the new hardware
c. update the list of cards and slots on the system shown in the I/O cards
area
NOTE At this point, the OLA is complete. Note that in some cases additional
configuration in another area of SMH may also be required. A network
interface card, for example, might require network parameter setup in
the Network Interface Card portion of the Networking and
Communications area.
Step 11. If the OLA is successful, connect the cables to the card.