User's Manual

Diagnostic Messages
X.25 Diagnostic Messages
Appendix C248
65 (CLEAR) Facility/
registration
code not
allowed.
Packet size negotiation, Window Size
Negotiation or Throughput Class Negotiation
facility codes found in the facility field of the call
setup packet when corresponding negotiation
had not been configured. In CALL REQUEST,
condition results in error returned to user
instead of generation of CLEAR.
If facility checking was configured, a facility code
not allowed by configured level (1980 or 1984)
was found before the first facility marker. In
CALL REQUEST, this condition results in an
error returned to user instead of generation of
CLEAR.
If facility checking was configured along with
rejection of duplicate facilities, a combination of
invalid facility codes was detected.
The combination may indicate that the basic and
extended format of given facility are present or
that both the Closed User Group and Closed
User Group with Outgoing Access facilities are
present. In CALL REQUEST, this condition
results in an error instead of a CLEAR.
Facility marker 00 3B (hex) found, which
corresponds to “internal” facilities. This facility
marker is not allowed by either application or
network. In CALL REQUEST, this condition
results in an error returned to the user instead of
CLEAR.
Table C-5 Call Setup, Call Clearing, or Registration Problem (Continued)