- HP Compaq LED Backlit LCD Monitors Manual

Table A-10 Factory Preset Modes (continued)

8 1680 × 1050 65.29 59.954

9 1920 × 1080 67.5 60.00

Table A-11 High Definition Video Formats

Preset Timing Name Pixel Format Horz Freq (kHz) Vert Freq (Hz)

1 480p 720 × 480 31.469 60

2 576p 720 × 576 31.25 50

3 720p50 1280 × 720 37.5 50

4 720p60 1280 × 720 45 60

5 1080p50 1920 × 1080 56.25 50

6 1080p60 1920 × 1080 67.5 60

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:

●

You are not using a standard graphics adapter.

●

You are not using a preset mode.

It this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen

display. Your changes can be made to any or all of these modes and saved in memory. The monitor

automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In

addition to the factory preset modes, there are at least 10 user modes that can be entered and stored.

Energy Saver Feature

The monitors support a reduced power state. The reduced power state will be entered into if the

monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon

detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and

the power light is turned amber. When the monitor is in the reduced power state, the monitor will

utilize .5 watts of power. There is a brief warm up period before the monitor will return to its normal

operating mode.

Refer to the computer manual for instructions on setting energy saver features (sometimes called power

management features).

NOTE: The above power saver feature only works when connected to computers that have energy

saver features.

By selecting the settings in the monitor's Energy Saver utility, you can also program the monitor to enter

into the reduced power state at a predetermined time. When the monitor's Energy Saver utility causes

the monitor to enter the reduced power state, the power light blinks amber.

ENWW

Entering User Modes