Compaq Guide to PC Deployment: Network Installation of Microsoft Windows NT on Compaq Armada Series of Personal Computers Using Microsoft Tools

Compaq Guide to PC Deployment 10
Preliminary
PRT/008A/0699
9. Add the following lines to the UNATTEND.TXT:
[OEM_Ads]
SetupNetwork = "yes"
[Network]
InstallAdapters = SelectedAdaptersSection
InstallProtocols = ProtocolsSection
InstallServices = ServicesSection
JoinWorkgroup = WORKGROUP
[SelectedAdaptersSection]
CEM56 = OEMAdapterParamSection, \$oem$\net\CEM56
[OEMAdapterParamSection]
[ProtocolsSection]
NBF = NetBEUI_Parameters
TC = TCPIP_Parameters
[NetBEUI_Parameters]
[TCPIP_Parameters]
DHCP = yes
[ServicesSection]
RAS = RASParameterSection
[RASParameterSection]
DialoutProtocols = TCP/IP
DialinProtocols = TCP/IP
PortSections = PortSectionParameters
[PortSectionParameters]
PortName = COM2
DeviceType = Modem
PortUsage = DialinOut
Device = "Modem of Xircom CreditCard 100+56"
[Modem]
InstallModem = ModemParametersSection
[ModemParametersSection]
COM2 = "Modem Of Xircom CreditCard 100+56"
Integrating ESS Audio Drivers
1. Create the \\servername\sharename\I386\$oem$\drive_letter\folder_name folder.
2. Extract the ESS audio driver SoftPAQ to a temporary directory.
3. Copy the \DISK1 folder from the temporary directory to
\\servername\sharename\I386\$oem$\drive_letter\folder_name folder (e.g.,
\\servername\sharename\I386\$oem$\c\ESS\DISK1).
4. Copy the file CHANGE.REG from the folder
\\servername\sharename\I386\$oem$\c\ESS\DISK1 to \\servername\sharename\I386\
$oem$
directory.