Compaq Guide to PC Deployment: Network Installation of Microsoft Windows NT on Compaq Armada Series of Personal Computers Using Microsoft Tools

Compaq Guide to PC Deployment 11
Preliminary
PRT/008A/0699
5. Add the following lines to the CMDLINES.TXT:
[Commands]
“c:\ESS\DISK1\setup –s”
Installing Compaq Software
Installing System Enhancements
1. Create a \\servername\sharename\I386\$oem$\drive_letter\folder_name folder.
2. Extract the System Enhancements SoftPAQ obtained to a temporary directory.
3. Copy the \DISK1 folder from the temporary directory to
\\servername\sharename\I386\$oem$\drive_letter\folder_name (e.g.,
\\servername\sharename\I386\$oem$\c\ENHNT\DISK1).
4. Add the following lines to the CMDLINES.TXT:
[Commands]
“c:\ENHNT\DISK1\setup –s”
Installing Security 32
1. Create a \\servername\sharename\I386\$oem$\drive_letter\folder_name folder.
2. Extract the Security 32 Support SoftPAQ to a temporary directory.
3. Copy the \DISK1 folder from the temporary directory to the
\\servername\sharename\I386\$oem$\drive_letter\folder_name folder (e.g.,
\\servername\sharename\I386\$oem$\c\SEC32\DISK1).
4. Add the following lines to the CMDLINES.TXT:
[Commands]
“c:\SEC32\DISK1\setup –s”
Installing Multibay Driver
1. Create \\servername\sharename\I386\$oem$\drive_letter\folder_name folder.
2. Extract the Multibay Driver SoftPAQ to a temporary directory.
3. Copy the folder \DISK1 from the temporary directory to the
\\servername\sharename\I386\$oem$\drive_letter\folder_name folder (e.g.,
\\servername\sharename\I386\$oem$\c\MULTBAY\DISK1).