Compaq Guide to PC Deployment: Network Installation of Microsoft Windows NT on Compaq Armada Series of Personal Computers Using Microsoft Tools

Compaq Guide to PC Deployment 12
Preliminary
PRT/008A/0699
4. Add the following lines to the CMDLINES.TXT:
[Commands]
“c:\MULTBAY\DISK1\setup –s”
Installing Power Management
1. Create a \\servername\sharename\I386\$oem$\drive_letter\folder_name folder.
2. Extract the Power Management SoftPAQ to a temporary directory.
3. Copy the folder \DISK1 from the temporary directory to the
\\servername\sharename\I386\$oem$\drive_letter\folder_name folder (e.g.,
\\servername\sharename\I386\$oem$\c\POWER\DISK1).
4. Add the following lines to the CMDLINES.TXT:
[Commands]
“c:\POWER\DISK1\setup –s”
Installing Manageability Agents
1. Create a \\servername\sharename\I386\$oem$\drive_letter\folder_name folder.
2. Extract the Manageability Agents SoftPAQ to a temporary directory.
3. Copy the folders \DISK1, \DISK2, and \DISK3 from the temporary directory to the
\\servername\sharename\I386\$oem$\drive_letter\folder_name folder (e.g.,
\\servername\sharename\I386\$oem$\c\IM\DISK1
\\servername\sharename\I386\$oem$\c\IM\DISK2
\\servername\sharename\I386\$oem$\c\IM\DISK3).
4. Add the following lines to the CMDLINES.TXT:
[Commands]
“c:\IM\DISK1\setup –PREINST -S”
Installing CardWare
1. Create the \\servername\sharename\I386\$oem$\drive_letter\folder_name folder.
2. Extract the CardWare SoftPAQ to a temporary directory.
3. Copy the folders \DISK1, \DISK2, and \DISK3 from the temporary directory to
\\servername\sharename\I386\$oem$\drive_letter\folder_name folder (e.g.,
\\servername\sharename\I386\$oem$\c\CWARE\DISK1
\\servername\sharename\I386\$oem$\c\CWARE\DISK2
\\servername\sharename\I386\$oem$\c\CWARE\DISK3).