Compaq Guide to PC Deployment: Network Installation of Microsoft Windows NT on Compaq Armada Series of Personal Computers Using Microsoft Tools

Compaq Guide to PC Deployment 9
Preliminary
PRT/008A/0699
4. Add the following lines to the CMDLINES.TXT:
[Commands]
“c:\Modem\NT40\setup –N –HOMECOUNTRY=US –S”
Installing Xircom Combo Card Driver
1. Verify that the PCMCIA.SYS has been copied to \I386 directory. (Refer to “Service Pack 3
Required Modifications” above.)
2. Create the \\servername\sharename\I386\$oem$\NET\CEM56\NT40 folder.
3. Extract the Xircom Combo Ethernet/Modem Driver SoftPAQ to a temporary directory.
(Refer to file READUNAT.TXT under \DISK1\NT40 directory for more info on unattended
installation of Xircom Combo Ethernet/Modem Driver.)
4. Copy the following files from the \DISK1 folder in the temporary directory to
\\servername\sharename\I386\$oem$\NET\CEM56 directory:
CEM56.DLL
CEM56.SYS
CTL3DV2.DL_
MDMCEM56.INF
MDMTESTW.EX_
OEMSETNT.INF
README.TXT
TELSEL.EX_
XCEMTEST.EX_
XREG3.DA_
XREG3.EX_
XREGQUES.DA_
5. Copy MDMCEM56.INF from the \\servername\sharename\I386\$oem$\NET\CEM56
directory to the \\servername\sharename\I386 and
\\servername\sharename\I386\$oem$\NET\CEM56\NT40 directories.
6. Open the \\servername\sharename\I386\DOSNET.INF file with a text editor and add the
following entry under the [Files] section:
[Files]
d1,mdmcem56.inf
7. Open the \\servername\sharename\I386\TXTSETUP.SIF file with a text editor and add the
following entries under the [SourceDisksFiles] and [SourceDisksFiles.x86] sections:
[SourceDisksFiles]
mdmcem56.inf = 1,,,,,,,20,0,0
[SourceDisksFiles.x86]
mdmcem56.inf = 1,,,,,,,20,0,0
8. Rename \\servername\sharename\I386\$oem$\NET\CEM56\OEMSETNT.INF to
\\servername\sharename\I386\$oem$\NET\CEM56\OEMSETUP.INF