Service and Maintain

Service Reference Guide, dx2200 MT 415606-001 6–19
Removal and Replacement Procedures— Microtower (MT) Chassis
6.10 Speaker
1. Prepare the computer for disassembly (Section 6.1, “Preparation for Disassembly”).
2. Remove the access panel (Section 6.2, “Access Panel”).
3. Remove the front bezel (Section 6.3, “Front Bezel”).
4. Disconnect the speaker cable from the system board.
5. Free the cable from the cable tie that is attached to the chassis.
6. Remove the screw that secures the speaker to the inside of the chassis 1 then, remove the
speaker 2 by sliding it out of the retaining clips
To install the speaker, reverse the removal procedure.
When installing the speaker, make sure the speaker wires point towards the speaker retaining
screw.