Computer Setup (F10) Utility Guide - dx7500 Models HP Compaq Business PC
© Copyright 2008 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. Microsoft, Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
About This Book This guide provides instructions on how to use Computer Setup. This tool is used to reconfigure and modify computer default settings when new hardware is installed and for maintenance purposes. WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.
iv About This Book ENWW
Table of contents Computer Setup (F10) Utility Computer Setup (F10) Utilities ............................................................................................................. 1 Using Computer Setup (F10) Utilities .................................................................................. 1 Computer Setup—Main ....................................................................................................... 2 Computer Setup—Advanced .................................................
vi ENWW
Computer Setup (F10) Utility Computer Setup (F10) Utilities Use Computer Setup (F10) Utility to do the following: ● Change factory default settings. ● Set the system date and time. ● Set, view, change, or verify the system configuration, including settings for graphics, audio, storage, communications, and input devices. ● View settings for processor and memory. ● Modify the boot order of bootable devices such as hard drives, diskette drives, optical drives, or USB flash media devices.
Use the arrow keys to select the appropriate heading, then press Enter. Use the arrow (up and down) keys to select the option you want, then press Enter. To return to the previous screen, press Esc. CAUTION: Do NOT turn the computer power OFF while the ROM is saving the Computer Setup (F10) changes because the CMOS could become corrupted. It is safe to turn off the computer only after exiting the F10 Setup screen.
● Product Number ● Asset Tag (press Enter to change) Computer Setup—Advanced NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration. WARNING! Setting items on this menu to incorrect values may cause your system to malfunction.
Table 2 Computer Setup—Advanced (continued) Internal Speaker Allows you to set the internal speaker to: ● Disabled ● Enabled Supervisor Password Allows you to view the supervisor password. User Password Allows you to view the user password. Onboard 1394 Allows you to enable/disable all 1394 ports. Change Supervisor Password Allows you to change the supervisor password. Computer Setup—Power NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Table 4 Computer Setup—Boot (continued) Floppy Group Boot Priority Specifies boot device priority within removable devices. CD-ROM Group Boot Priority Specifies boot device priority within CD/DVD drives. Hard Drive Group Boot Specifies boot device priority within hard drives. Priority Network Group Boot Priority Specifies boot device priority within bootable network devices. Computer Setup—Exit NOTE: Support for specific Computer Setup options may vary depending on the hardware configuration.
Recovering the Configuration Settings To reset all BIOS Setup options to their default values (including options for Ctrl+F10), you must enter F10 Setup mode and press F5. This does not include updates to system date, system time, supervisor password, user password, and CPU frequency multiplier.
