SAN Switch Rack Mount Kit - Installation Instructions

8 SAN Switch Rack Mount Kit Installation Instructions

Installing the Switch in a Rack Using the SAN Switch

Rack Mount Kit

This section provides instructions for installing the SAN Switch 2/32, SAN

Switch 2/16, or SAN Switch 2/8 in an HP System/e rack, or in an HP 9000 Series

or comparable EIA rack using the SAN Switch Rack Mount Kit, part number

331148-B21.

Figure 1: SAN Switch 2/16 rack-mounted switch

Note: The Rack Mount Kit installation requires one technician to install a SAN switch.

The following items are required to install the switch in a rack:

■ SAN Switch 2/32, SAN Switch 2/16, or SAN Switch 2/8

■ Power cables

■ #2 Phillips screwdriver

■ 7/16-inch wrench or socket

■ The SAN Switch Rack Mount Kit rails and rail mounting hardware listed