Compaq ProLiant Cluster HA/F500 Enhanced DT Supplement

Introduction
ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide 1-5
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: b-ch1 Introduction
Codename: Chargers Part Number: 165103-004 Last Saved On: 7/30/02 9:23 AM
Required Configuration Components
You will need the components in Table 1-1 to install the HA/F500 Enhanced DT
cluster.
NOTE: Only the Secure Path software is included in this kit.
Table 1-1: Required Components
Components Supported Products
Up to four cluster nodes For a current list of supported ProLiant servers,
check the website:
www.compaq.com/highavailability
Operating system Microsoft Windows NT Server 4.0,
Enterprise Edition, Microsoft Windows 2000
Advanced Server, or Microsoft
Windows 2000 Datacenter Server
Host bus adapters (HBAs) StorageWorks 32-Bit/33-MHz PCI-to-Fibre
Channel Host Bus Adapters
StorageWorks 64-Bit/33-MHz PCI-to-Fibre
Channel Host Bus Adapters
StorageWorks FCA2101 PCI-to-Fibre Channel
Host Bus Adapters
Four Fibre Channel switches StorageWorks Fibre Channel SAN 8/8-EL or
16/16-EL switches
Fibre Channel cables Shortwave Length (SWL) Multimode
Longwave Length (LWL) Single mode
(non-ATM configuration)
Fibre Channel interconnects Gigabit Link Module (GLM) SWL
Gigabit Interface Converter (GBIC) LWL or
VLWL (Very Longwave Length) (non-ATM
configuration)
ATM interconnect Open Systems Gateway (OSG)
continued