Compaq ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide 2-15
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: 49er Part Number: 268374-002 Last Saved On: 5/28/02 3:01 PM
9. Create the cluster zone on the switch by using the following command:
zonecreate “ClusterZoneName”,
“HSVControllerAPortAlias;HSVControllerBPortAlias;
HostAConnectionAlias;HostBConnectionAlias”
The display will be similar to Figure 2-10. The cluster zone example created in
Figure 2-10 is made up of the top switch, the top HSV port 1, the bottom HSV
port 2, Host A S1, and Host B S1.
Figure 2-10: Creating the cluster zone