Compaq ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
2-24 ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: 49er Part Number: 268374-002 Last Saved On: 5/28/02 3:01 PM
e. Select the correct Prefer path/mode. Path A-Failover only or
Path B-Failover only are the only options supported for clustering. Set a
preferred controller for each virtual disk drive, Path A or Path B, for load
balancing.
Figure 2-17: Selecting the preferred path
f. Click Finish, OK.
g. Repeat steps a through f to create the necessary virtual disks needed
according to the number of LUNs you will have.