Compaq ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide 2-27
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: 49er Part Number: 268374-002 Last Saved On: 5/28/02 3:01 PM
Installing Secure Path
SANworks Secure Path for Windows must be installed before any virtual disks can
be recognized and configured. Follow the instructions that come with Secure Path for
more specific installation and configuration information.
1. Install Secure Path using the latest kit. Follow the on-screen instructions.
Configure the host in Secure Path to reflect the server and the monitor node.
IMPORTANT: Verify that reverse look-up is configured on the Domain Name System
(DNS) server if you are using Fully Qualified Domain Name (FQDN).
Figure 2-20: Host and monitor node reflected
2. Restart the servers.