Compaq ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Managing Your ProLiant Cluster HA/F500
3-4 ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: d-ch3
Codename: 49er Part Number: 268374-002 Last Saved On: 5/28/02 3:03 PM
Compaq Software
Compaq offers an extensive set of features and optional tools to support effective
configuration and management of your Compaq ProLiant cluster.
IMPORTANT: For information about software version levels, see Appendix A.
• SmartStart CD:
— Compaq System Configuration Utility
— Compaq Support Software for Windows 2000 Advanced Server,
Windows 2000 Datacenter Server, or Windows NT
• Compaq Insight Manager 7
• SANworks Secure Path for Windows
• SANworks Enterprise Volume Manager by Compaq
SmartStart CD
Compaq SmartStart configuration software, located on the SmartStart CD, is the
intelligent way to configure the ProLiant servers for your ProLiant Cluster HA/F500.
SmartStart configuration software uses a step-by-step process to configure the servers
and load system software.
For information concerning SmartStart software, refer to the documentation you
received with your Compaq ProLiant server.
Compaq System Configuration Utility
The SmartStart CD also contains the Compaq System Configuration Utility. This
utility is the primary means to configure hardware devices in your server, such as
I/O addresses, boot order of disk controllers, and so on.
For information concerning the Compaq System Configuration Utility, refer to the
documentation you received with your Compaq ProLiant server.