HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide

Cluster Installation
Table 2-2: Hardware Preparation Checklist for CA EVA Installation continued
Task Reference Document
Plan and populate layout of one or more
physical disk groups.
HP StorageWorks Continuous Access EVA
Operations Guide
, Chapter 3
Power up storage systems and SMAs.
• HP ProLiant Cluster HA/F500 for EVA
Setup and Installation Guide, Chapter 2
• Compaq SANworks Management
Appliance Getting Started Guide,
Chapter 2
Setting Up the Servers
To prepare the CA solution for setup, refer to the ProLiant cluster documentation.
Follow the installation instructions in the ProLiant server documentation.
Setting Up the Storage Subsystem
Refer to the documentation that was shipped with the storage subsystem for detailed
installation instructions.
Setting up the Fibre Channel Adapters
Two FCAs must be installed on each host. For detailed installation instructions, refer
to the documentation that comes in the host kit or with your adapter.
Locate and record the World Wide Names (WWNs) of each FCA on the zoning
worksheet provided at the end of this chapter. Keep a copy of the worksheets at all
your sites. In addition, record the WWNs for the EVA and the SMAs for each site.
NOTE: The WWN can be found on the bottom of FCA board. Look for a small bar code label
with an IEEE precursor. A WWN example is 1000-0000-C920-A5BA.
HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide 2-5
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: 49ers III Part Number: 339223-001 Last Saved On: 5/29/03 2:22 PM