HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide

Cluster Installation
Adding a Host
NOTE: If the SAN appliance cannot see the host WWNs, perform steps 1 and 2. Otherwise,
begin at step 3.
1. Reboot the SAN appliance.
2. Access the Command View EVA application.
3. Click the desired host in the navigation pane. The Add a Host window displays.
Figure 2-9: Add a Host window
4. In the Host name: field, enter the host name.
5. In the Host IP address: dropdown menu, select the appropriate scheme or enter
the IP address if it is a static IP address.
6. In the Port WW Name: dropdown menu, select a port WWN for the first FCA.
7. Click Add Host, and then click OK.
HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide 2-21
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: 49ers III Part Number: 339223-001 Last Saved On: 5/29/03 2:22 PM