HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide

Cluster Installation
6. Select the Presentation tab to verify that both hosts are on the same LUN. The
Vdisk Active Members Property window displays.
Figure 2-14: Vdisk Active Member Properties window—
Presentation Tab view
7. Repeat steps 1 through 6 for each VD.
8. Power on Node 1.
9. Log on to the domain.
10. Wait until all the VDs are discovered.
11. Open the operating system Device Manager and look at that disk drive.
12. Go to the operating system Disk Manager and select
Initialize, do not upgrade to dynamic disk.
13. Format the disk and label the volumes.
14. Install MSCS on Node 1. See the appropriate documentation.
2-26 HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: 49ers III Part Number: 339223-001 Last Saved On: 5/29/03 2:22 PM