HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide

Cluster Installation
Creating the Copy Sets
NOTE: Entering the first copy set will force the DR group creation sequence if no DR Group
has yet been created.
1. On the Continuous Access window, select the site from the navigation pane.
2. Click Create >Copy Set. The Create a new Copy Set window opens.
Figure 2-18: Create a new Copy Set window
3. In the DR Group: dropdown list, select the DR group to which the copy set will
belong.
4. In the Copy Set: field, enter the copy set name.
5. Select the source VD from the Source Virtual Disk: dropdown list.
6. Enter the DR Group.
2-30 HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: 49ers III Part Number: 339223-001 Last Saved On: 5/29/03 2:22 PM