HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
9. Create the cluster zone on the switch by using the following command:
zonecreate “ClusterZoneName”,
“HSVControllerAPortAlias;HSVControllerBPortAlias;
HostAConnectionAlias;HostBConnectionAlias”
The display will be similar to Figure 2-9. The cluster zone example created in
Figure 2-9 is made up of the top switch, the top HSV port 1, the bottom HSV
port 2, Host A S1, and Host B S1.
Figure 2-9: Creating the cluster zone
2-14 HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2
Codename: Part Number: 323454-001 Last Saved On: 3/20/03 10:51 AM