HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
11. Create a zone configuration to integrate the switch cluster zone and the controller
zone by using the following commands:
cfgcreate “ZoneConfigurationName”,
“ClusterZoneName;ControllerZoneName”
cfgsave
cfgenable “ZoneConfigurationName”
The display will be similar to Figure 2-11. A zone configuration is a set of one or
more zones. When zoning is enabled, one zone configuration is in effect. When a
zone configuration is in effect, all zones that are members of that configuration
are valid.
Figure 2-11: Creating a zone configuration
2-16 HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2
Codename: Part Number: 323454-001 Last Saved On: 3/20/03 10:51 AM