HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Troubleshooting the ProLiant Cluster HA/F500
• If the second node was powered on before either the Fibre Channel Switch or
the storage subsystem, shut down the second node, turn it off, then turn it on. The
storage subsystem components must be powered on before the servers.
•
•
•
•
•
•
Verify the zoning configuration.
Verify that the presentation is set correctly (verify that the hosts are on the same
LUN)
Troubleshooting Cluster Networking
For troubleshooting information on this topic, refer to the following Microsoft
articles and related documentation on the Microsoft website at
www.microsoft.com/support.
Q193890—Recommended WINS Configuration for Microsoft Cluster Server
Q254101—Network Adapter Teaming and Server Cluster
Q254651—Cluster Network Role Changes Automatically
Q258750—Recommended Private “Heartbeat” Configuration on a
Cluster Server
Troubleshooting Cluster Group and Cluster Resource
Problems
Cluster group and cluster resource problems are related to Microsoft Cluster
Administrator. For troubleshooting tips on this topic, refer to the Microsoft Cluster
Server Administrator Guide and the Microsoft Cluster Administrator online
documentation.
HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide 4-5
HP CONFIDENTIAL
Writer: Bill Akers File Name: e-ch4
Codename: 49ers II Part Number: 323454-001 Last Saved On: 3/20/03 10:59 AM