HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide

Introduction
Required Configuration Components
You will need the components in Table 1-1 to install the HA/F500 Enhanced DT
cluster.
NOTE: Only the StorageWorks Secure Path software is included in this kit.
Table 1-1: Required Components
Components Supported Products
Up to four cluster nodes For a current list of supported HP ProLiant
servers, refer to the website
www.hp.com/servers/proliant/highavailability
Operating system
• Microsoft Windows Server 2003, Enterprise
Edition
• Microsoft Windows 2000 Advanced Server
• Microsoft Windows NT Server 4.0,
Enterprise Edition
Host bus adapters (HBAs) StorageWorks 64-Bit/33-MHz PCI-to-Fibre
Channel Host Bus Adapters
StorageWorks FCA2101 PCI-to-Fibre Channel
Host Bus Adapters
Four Fibre Channel switches StorageWorks Fibre Channel SAN 8/8-EL or
16/16-EL switches
Fibre Channel cables Shortwave Length (SWL) Multimode
Longwave Length (LWL) Single mode
(non-ATM configuration)
Fibre Channel interconnects Gigabit Link Module (GLM) SWL
Gigabit Interface Converter (GBIC) LWL or Very
Longwave Length (VLWL) (non-ATM
configuration)
ATM interconnect Open Systems Gateway (OSG)
continued
HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide 1-5
HP CONFIDENTIAL
Writer: Bill Akers File Name: b-ch1 Introduction
Codename: Chargers II Part Number: 324547-001 Last Saved On: 4/7/03 10:30 AM