HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide

Cluster Installation
Verifying StorageWorks Fibre Channel Software Installation
Verify that StorageWorks Fibre Channel software is installed. Go to the
Add/Remove Programs screen to verify.
Installing StorageWorks Secure Path
Refer to the StorageWorks Secure Path for Windows installation guide for
installation information.
Installing StorageWorks Command Console
Installing SWCC is optional. Refer to the StorageWorks Command Console getting
started guide for SWCC installation instructions.
Connecting Fiber Optic Cables Between the Hosts and Switches
To connect the fiber optic cables between the host and switches:
1. Connect the first multimode fiber optic cable from port 0 of the top switch to
one adapter on a host.
2. Connect the second multimode fiber optic cable from port 0 of the bottom switch
to the other adapter on the same host.
IMPORTANT: Choose any available port to connect the cable, but maintain the identical
scheme at the initiator site. For example, if port 1 of controller B is connected to port 2 of
the bottom switch at the target site, then port 1 of controller B must be connected to port 2
of the bottom switch at the initiator site.
2-18 HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: Chargers II Part Number: 324547-001 Last Saved On: 4/7/03 10:32 AM