HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide

Cluster Installation
3. If you have more than one host, connect one HBA to one of the remaining ports
on the top switch. Connect the other HBAs to the same numbered ports on the
bottom switch.
The host is now connected to the target site switches by means of the multimode
fiber optic cables.
4. Verify that the connection between the host and switches has been made by
entering the following command:
SHOW CONNECTIONS
NOTE: Verify that a connection has been made by looking for a solid green LED indicator
on the switch ports.
The display will be similar to Figure 2-11.
Figure 2-11: Verifying connections
HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide 2-19
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: Chargers II Part Number: 324547-001 Last Saved On: 4/7/03 10:32 AM