HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide

Cluster Installation
From the Initiator Site
Create the connections between the initiator and target sites before creating the
remote copy set by entering the following command:
ADD REMOTE RCS199 D199 TargetName\D199
NOTE: Although this command will fail, it creates and names the connections appropriately.
To create remote copy sets from the initiator site:
1. Verify that the initiator has access to the target controller by entering the
following command:
SHOW CONNECTIONS
The display will be similar to Figure 2-24.
Figure 2-24: New settings after renaming host
connections
2-36 HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: Chargers II Part Number: 324547-001 Last Saved On: 4/7/03 10:32 AM