HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide

Cluster Installation
Creating a Log Unit
To create a log unit:
1. Create a mirrorset for the log disk by entering the following command:
ADD MIRRORSET MirrorsetName DiskName
Example: ADD MIRR MIR_D1LOG DISK50100 DISK60100
2. Initialize the mirrorset by entering the following command:
INITALIZE ContainerName
Example: INITIALIZE MIR_D1LOG
3. Verify that the mirrorset is created by entering the following command:
SHOW MIRRORSET
The display will be similar to Figure 2-26.
Name Storageset Uses Used by
---------------------------------------------------
MIR_D1LOG mirrorset DISK50100
DISK60100
Figure 2-26: Verifying a mirrorset
2-38 HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: Chargers II Part Number: 324547-001 Last Saved On: 4/7/03 10:32 AM