HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide

Cluster Installation
2-56 HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: Chargers II Part Number: 324547-001 Last Saved On: 4/7/03 10:32 AM
Configuring the Host at the Target Site
Complete the following steps on the host server at the target site. The detailed steps
can be found earlier in this chapter. This procedure configures the target host with the
HBAs and associated drivers and software. Additional information can be found in
the HP ProLiant Cluster HA/F500 for MA8000 Administrator Guide.
1. “Installing the Host Bus Adapters and Drivers”
2. “Verifying StorageWorks Fibre Channel Software Installation”
3. “Installing StorageWorks Secure Path”
4. “Installing StorageWorks Command Console” (optional)
5. “Connecting Fiber Optic Cables Between the Hosts and Switches”
6. “Renaming the Host Connections”
Configuring the Host at the Initiator Site
Complete the following steps on the host server at the initiator site. The detailed steps
can be found earlier in this chapter. This procedure configures the initiator host with
the HBAs and associated drivers and software. Additional information can be found
in the HP ProLiant Cluster HA/F500 for MA8000 Administrator Guide.
1. “Installing the Host Bus Adapters and Drivers”
2. “Verifying StorageWorks Fibre Channel Software Installation”
3. “Installing StorageWorks Secure Path”
4. “Installing StorageWorks Command Console” (optional)
5. “Connecting Fiber Optic Cables Between the Hosts and Switches”
6. “Renaming the Host Connections”
7. “Enabling Access to the Host at the Initiator Site”
IMPORTANT: Enable access to both connections for each of the cluster nodes.