Compaq ProLiant Cluster HA/F500 Enhanced DT Supplement

Cluster Installation
2-34 ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2 Cluster Installation
Codename: Chargers Part Number: 165103-004 Last Saved On: 7/30/02 9:25 AM
Connecting the Initiator Site to the ATM Link
Locate the connection points linking the initiator site to the target site. To connect the
initiator site to the ATM link:
1. Connect a multimode fiber optic cable from port 6 of the first switch to
PCI number 1 on the first Open Systems Gateway (OSG) box.
2. Connect a multimode fiber optic cable from port 6 of the second switch to
PCI number 1 on the second OSG box.
Refer to the Compaq SANworks Data Replication Manager Over an ATM Link
Application Note for information on completing the connection to the ATM link.
Creating Remote Copy Sets
Remote copy sets must be created from both the initiator and the target site.
From the Target Site
To create remote copy sets from the target:
1. Create the connections between the target and initiator sites before creating the
remote copy set by entering the following command:
ADD REMOTE RCS199 D199 InitiatorName\D199
NOTE: Although this command will fail, it creates and names the connections
appropriately.