Compaq ProLiant Cluster HA/F500 Enhanced DT Supplement

Cluster Installation
ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide 2-43
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2 Cluster Installation
Codename: Chargers Part Number: 165103-004 Last Saved On: 7/30/02 9:25 AM
3. If you have more than one host, connect one host bus adapter to one of the
remaining ports on the top switch. Connect the other host bus adapters to
the same numbered ports on the bottom switch.
The host is now connected to the target site switches by means of the multimode
fiber optic cables.
4. Verify that the connection between the host and switches has been made by
entering the following command:
SHOW CONNECTIONS
NOTE: Verify that a connection has been made by looking for a solid green LED indicator
on the switch ports.
The display will be similar to Figure 2-30.
Figure 2-30: New settings after renaming host
connections