Compaq ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide 2-17
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: 49er Part Number: 268374-002 Last Saved On: 5/28/02 3:01 PM
11. Create a zone configuration to integrate the switch cluster zone and the controller
zone by using the following commands:
cfgcreate “ZoneConfigurationName”,
“ClusterZoneName;ControllerZoneName”
cfgsave
cfgenable “ZoneConfigurationName”
The display will be similar to Figure 2-12. A zone configuration is a set of one or
more zones. When zoning is enabled, one zone configuration is in effect. When a
zone configuration is in effect, all zones that are members of that configuration
are valid.
Figure 2-12: Creating a zone configuration