Compaq ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
2-20 ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: 49er Part Number: 268374-002 Last Saved On: 5/28/02 3:01 PM
Downloading the Latest FCA Driver
Perform the following steps before presenting the disk drives:
1. Verify the FCA driver version installed on your system.
2. Go to the Compaq website at
www.compaq.com/products/servers/proliantstorage/adapters/ and check for the
latest Fibre Channel Host Bus Adapter driver version supported.
IMPORTANT: Skip the following step if you have the latest FCA driver installed on your
system.
3. Download the latest FCA driver update utility and install the update utility on
each server, one server at a time.
Logging On to the Storage System
Use a supported Web browser to access the management appliance. A list of
supported browsers is available with the documentation that comes with the
HSV Element Manager software.
Refer to the Enterprise Virtual Array documentation for instructions on opening the
HSV Element Manager.
1. Log in to the management appliance from any network browser.
— User name=administrator
— Password=administrator
2. Select Resource Manager, Element Manager, HSV Element Manager to
launch the HSV Element Manager.