Compaq ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
2-22 ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: 49er Part Number: 268374-002 Last Saved On: 5/28/02 3:01 PM
f. Enter an adapter port WWN. Use the table in Appendix B to correctly
identify which FCA card is located in each server or use the lputilnt utility.
Select the correct WWN from the list.
Figure 2-15: Selecting a World Wide Name
g. Select Microsoft Windows as the operating system.
h. Click Next Step.
i. Click Finish, OK.
j. Click Add a Port.
k. Select the second FCA from the list.
l. Click Finish, OK.
m. Repeat steps a through l for the second host.