Compaq ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Troubleshooting Your ProLiant Cluster HA/F500
ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide 4-5
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: e-ch4
Codename: 49er Part Number: 268374-002 Last Saved On: 5/28/02 3:05 PM
• If the second node was powered on before either the Fibre Channel Switch or
the storage subsystem, shut down the second node, turn it off, then turn it on. The
storage subsystem components must be powered on before the servers.
• Verify the zoning configuration.
• Verify that the presentation is set correctly (refer to Figure 2-19).
Troubleshooting Cluster Networking
For troubleshooting information on this topic, refer to the following Microsoft
articles and related documentation on the Microsoft website at
support.microsoft.com/support.
• Q193890—Recommended WINS Configuration for Microsoft Cluster Server
• Q254101—Network Adapter Teaming and Server Cluster
• Q254651—Cluster Network Role Changes Automatically
• Q258750—Recommended Private “Heartbeat” Configuration on a
Cluster Server
Troubleshooting Cluster Group and Cluster Resource
Problems
Cluster group and cluster resource problems are related to Microsoft Cluster
Administrator. For troubleshooting tips on this topic, refer to the Microsoft Cluster
Server Administrator Guide and the Microsoft Cluster Administrator online
documentation.