HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide

2
Cluster Installation
This chapter details procedures outlined in the corresponding guides listed at the
beginning of each of the following sections. It is important to follow the steps
covered in this chapter because many steps are specific to the HA/F500 Enhanced DT
cluster installation.
Required Materials
To configure an HA/F500 Enhanced DT cluster for CA, you will need any applicable
documents listed in the “Related Documents” section of the HP Continuous Access
EVA Getting Started Guide. Many of the referenced documents will be online.
The following is a short list of essential documents.
•
•
•
•
•
•
•
•
•
HP Continuous Access EVA Getting Started Guide
HP ProLiant Cluster HA/F500 for EVA Setup and Installation Guide
HP StorageWorks Continuous Access EVA Design Reference Guide
HP StorageWorks Continuous Access User Interface Installation Guide
HP StorageWorks Continuous Access User Interface Release Notes
HP StorageWorks Command View EVA documentation, including online help
HP StorageWorks Continuous Access Management User Interface online help
HP StorageWorks Secure Path for Windows installation guide
Fibre Channel SAN Switch installation and hardware guide
HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide 2-1
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: 49ers III Part Number: 339223-001 Last Saved On: 5/29/03 2:22 PM