HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide

Cluster Installation
Creating the DR Groups
You can create the DR groups first or create the initial copy set, which forces the DR
group creation process.
The following procedure is for creating the DR groups before the copy sets.
1. On the Continuous Access window, select the site from the navigation pane.
2. Click Create >DR Group. The Create a new DR Group window opens.
Figure 2-17: Create a new DR Group window
3. In the DR Group: field, enter the name.
4. In the Destination Storage System: dropdown list, select the destination site.
5. In the Comments: field, enter any comments.
6. Click Next.
7. Click Finish, and then click OK.
8. Repeat the procedure for each DR group.
HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide 2-29
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: 49ers III Part Number: 339223-001 Last Saved On: 5/29/03 2:22 PM