HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
2. Display the World Wide Names (WWNs) and port information by using the
following command:
switchshow
The display will be similar to Figure 2-2. Record the complete 16-digit WWN
and the port information in the table in Appendix A. The information in
Appendix A will be used in later steps.
Figure 2-2: WWN and port information
HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide 2-7
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2
Codename: Part Number: 323454-001 Last Saved On: 3/20/03 10:51 AM