HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
3. Create aliases for the controller zone. The controller zone consists of the
SAN Appliance connections and the controller connections. Use the following
commands:
alicreate “SANApplianceAlias”, “WWN”
alicreate “HSVControllerAPortAlias”, “WWN”
alicreate “HSVControllerBPortAlias”, “WWN”
The display will be similar to Figure 2-3.
Figure 2-3: Creating controller zone aliases
2-8 HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2
Codename: Part Number: 323454-001 Last Saved On: 3/20/03 10:51 AM