HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
7. Create the controller zone by using the following command:
zonecreate “ControllerZoneName”,
“SANApplianceAlias;HSVControllerAPortAlias;
HSVControllerBPortAlias”
The display will be similar to Figure 2-7. The controller zone example created in
step 7 consists of the SAN Appliance, the top HSV port 1, and the bottom
HSV port 2.
Figure 2-7: Creating the controller zone
2-12 HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2
Codename: Part Number: 323454-001 Last Saved On: 3/20/03 10:51 AM