HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
10. Verify the cluster zone by using the following command:
zoneshow
The display will be similar to Figure 2-10. Note that at this time no configuration
is in effect.
Figure 2-10: Top switch cluster zone and
controller zone
HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide 2-15
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2
Codename: Part Number: 323454-001 Last Saved On: 3/20/03 10:51 AM