HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
14. Repeat the zoning steps for the second switch. Skip the steps used to create the
controller zone. There will not be a controller zone on the second switch.
The display will be similar to Figure 2-13 after all zoning on the second switch is
completed.
Figure 2-13: Second switch zoning
15. Repeat the zoning steps for the remaining clusters.
2-18 HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2
Codename: Part Number: 323454-001 Last Saved On: 3/20/03 10:51 AM