HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide

Setting Up Your ProLiant Cluster HA/F500
f. Enter an adapter port WWN. Use the table in Appendix A to correctly
identify which FCA card is located in each server or use the lputilnt utility.
Select the correct WWN from the list.
Figure 2-14: Selecting a World Wide Name
g. Select Microsoft Windows as the operating system.
h. Click Next Step.
i. Click Finish, OK.
j. Click Add a Port.
k. Select the second FCA from the list.
l. Click Finish, OK.
m. Repeat steps a through l for the second host.
HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Setup and Installation Guide 2-21
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2
Codename: Part Number: 323454-001 Last Saved On: 3/20/03 10:51 AM