HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Configuration Poster

Base Configuration
Data is mirrored in one direction,from Site 1 (Initiator) to
Site 2 (Target).
Bidirectional Configuration
Data is mirrored in two directions, from Site 1 (Initiator A) to Site
2 (Target A) and Site 2 (Initiator B) to Site 1 (Target B).
FDDI / ATM Network
Switch
Distance:
Up to
100km
Switch
Switch
Switch
ProLiant Server
(Node 1)
Initiator
ProLiant Server
(Node 2)
Site 1
Site 2
Storage
Subsystem
Target
Storage
Subsystem
Switch
Switch
Switch
Switch
Storage Subsystem
Storage Subsystem
FDDI / ATM Network
Distance:
Up to
100km
ProLiant Server
(Node 1)
Initiator A
Target B
ProLiant Server
(Node 2)
Site 1
Site 2
Target A
Initiator B
Color Key for Configuration Diagrams
Path 1 Shortwave Fiber Cables
Path 2 Shortwave Fiber Cables
Longwave Fiber Cables
Active Cluster Components
hp ProLiant cluster
ha/f500 for ma8000
enhanced DT
configuration poster
HP ProLiant Cluster HA/F500
Enhanced DT
This installation poster demonstrates two different HA/F500
Enhanced DT cluster configurations. Your configuration may
look different than the figures represented. Refer to the HP
ProLiant Cluster HA/F500 for MA8000 Enhanced DT
Supplement Guide for other configuration possibilities.
The major hardware components illustrated in this poster are:
 HP ProLiant servers (supported servers can be found at
www.hp.com/servers/proliant/highavailability)
 HP StorageWorks storage subsystems
MA8000/EMA12000/EMA16000 or
RA8000/ESA12000
 HP StorageWorks SAN switches
 FDDI/ATM network interconnect
 Host bus adapters
 Longwave fiber link/ATM link between switches
 Shortwave fiber link from switches to servers and storage
First Edition (May 2003)
Part Number 324545-001
324545- 001