HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide

Cluster Installation
2. Verify that the access on each unit is set to None by entering the following
command:
SHOW UNITS FULL
The display will be similar to Figure 2-22.
Figure 2-22: Verifying access to units
3. Repeat steps 1 and 2 for each unit.
4. Verify that the unit settings are correct by entering the following command:
SHOW UNITS FULL
5. Enter the following commands to distribute the units by setting their preferred
path:
SET UnitName PREFERRED_PATH=THIS_CONTROLLER
SET UnitName PREFERRED_PATH=OTHER_CONTROLLER
2-32 HP ProLiant Cluster HA/F500 for MA8000 Enhanced DT Supplement Guide
HP CONFIDENTIAL
Writer: Bill Akers File Name: c-ch2 Cluster Installation
Codename: Chargers II Part Number: 324547-001 Last Saved On: 4/7/03 10:32 AM