User's Manual

2–2 Compaq iPAQ Microportable Projector MP3800 User’s Guide
Using the Projector
Balancing the Projector
The projector has a built-in elevator foot used to balance and
elevate the projector. Always balance the projector before
connecting any device to it.
Turn the elevator foot sideways to balance the projector.
Å
WARNING: To reduce the risk of the projector tipping or overturning,
always turn the elevator foot 90° from its original position before
pressing the elevator button. Refer to the “Adjusting the Projector
Height” section later in this chapter.
Ä
CAUTION: If the projector is mounted to a tripod, do not use the
elevator foot.
281124-001.book!!Page!2!!Tuesday,!April!30,!2002!!10:00!AM