Installation Checklist - HP ProLiant Cluster F200 for MSA1500 with Active/Active Firmware using MicrosoftWindows 2000, Advanced Server

9
Validating the Cluster
To validate the cluster installation, perform the following steps from any cluster node. Place a
checkmark (3) in the box after completing each step.
3
Validating the Cluster

From the desktop of any node, select Start Æ Programs Æ Administrative Tools Æ Cluster Administrator,
and connect to the cluster.

Right click on one of the cluster groups and select Move Group.

Verify the group fails over and all resources come online.

Right click on the same cluster group and select Move Group.

Verify that the group fails over and all resources come online.

Repeat the validating the cluster steps, if desired, for each group.
The installation is now complete.